Mensch Manufacturing

Side-Shooter Mobile

logo

Quality Equipment

For the Dairy Farmer

The Fastest Way to Bed

The self-propelled Side-Shooter will decrease the time needed to bed free-stalls while reducing the amount of material wasted from improper placement.

Independent Conveyor Speeds

The operator can independently control the speeds of the main conveyor & cross conveyor to accommodate many different types of bedding and moisture content in the bedding. The conveyors can be adjusted quickly and easily with the turn of a dial from inside the cab.

Standard Features

  • Heat / Air Conditioning
  • Foot Brake

Options

  • Poly liner in box
  • Agitator
  • 2' box height extensions
  • Tire sizes
    • 425 / 65 R 22.5 (standard)
    • 385 / 65 R 22.5
    • 445 / 65 R 22.5

Rugged Cab Construction

The redesigned cab features military-grade components for long service life with no controls on the floor to be damaged by the corrosive manure and sand. The rubbed cab is easily cleaned.

Bed Head-to-Head Stalls

The high-speed oscillating cross conveyor can be angled upward to bed head-to-head free-stalls with a single pass.

Low Maintenance

Daily routine maintenance is as simple as performing a walk-around inspection, checking fluids, and greasing bearings.

Rearview Cameras

Standard dual rear cameras assist with backing up and navigating tight corners.

Maneuverability

Turning in cross alleys and around tight barns is effortless with the tight turning circle and the two steering modes. The operator can select from two-wheel or four-wheel steering.

Main Conveyor

The main conveyor uses heavy-duty pintle chain and drive sprockets for long service life and low maintenance.

Cross Conveyor

The cross conveyor uses an aggressive high-speed track, allowing the conveyor to place bedding 3 to 25 feet. The seamless fiberglass-reinforced track features positive drive cogs to provide rugged durability without slipping under load.

Unsurpassed Capacity

The large capacity of the Side-Shooter results in fewer trips, reduced labor costs, and reduced fuel consumption. The addition of optional 2' height extensions increase the capacity even more.

Excellent Visibility

The positioning of the cab allows the operator to watch the cross conveyor, the main conveyor, and the material being spread.

Hydrostatic Drive

The hydrostatic drive allows for varied ground speed while maintaining engine RPM to maintain consistent material flow, ensuring each free-stall is full of bedding.

Specs M 3600 M 3620
Hopper Capacity Heaped 15 cu. yd. 20 cu. yd.
Operating Weight Empty 18,500 lb. 21,000 lb.
Operating Weight Loaded 45,000 lb. 65,000 lb.
Turning Circle 7 ft. 12 ft.
Wheelbase 119 in. 167 in.
Overall Length 267 in. 324 in.
Overall Height 100 in. 101 in.
Overall Width 98 in. 98 in.
Engine 160 hp
Fuel Capacity 60 Gallons
Hydraulic Fluid Capacity 25 Gallons
Standard Tire Size 385/65 R 22.5 445/65 R 22.5
Parking Brake Spring Applied Wet Disc
Transmission Hydrostatic
Transfer Case 2 Speed w/ High Range Lock Out
Low Range Speed 9 mph
High Range Speed 20 mph
Discharge Distance 3 ft. - 25 ft.
Cab Heat / AC   Standard

Let's keep in touch